Air Conditioning Pressure Switch
specification & Features
OE/OEM Part Number
1K0959126D
Manufacturer Part Number
95561313700, 95561313703, 1K0959126B, 95561313702, 95561313701, 1J0959126, 1K0959126A, 1K0959126D, 1K0959126E, 5K0959126
Interchange Part Number
1K0959126A,1K0959126B,1K0959126D,1K0959126E,1J0959126,5K0959126
Type
HVAC Pressure Switch
Material
Metal+Plastic
Manufacturer Warranty
1 Year
Compatible Refrigerant
R134a, R1234yf
Accuracy
±1.5% Full Scale
Operating Temperature
-40°C to 150°C
Measurement Range
0–40 bar (580 psi)
About Product
This product is a next-generation intelligent car air conditioning pressure control system that combines a high-precision MEMS sensor unit with dual-threshold pressure protection technology. It was designed to be used under challenging operational conditions. Air conditioning pressure switches in coastal areas have corrosion and failure issues, however the stainless steel housing has passed 1,000 hours of salt spray testing (ASTM B117).
Additionally, it is compatible with dual refrigerant systems of R134a and R1234yf, which facilitates the transition between old and new energy cars. It features real-time CAN-BUS diagnostics and a full-scale accuracy of ±1.2%. In addition to providing you with three to six months' notice of compressor failure, it may detect pressure issues, such as indications of refrigerant leaks. Because of this, it's a fantastic substitute for outdated mechanical air conditioning pressure switches.
This sensor's construction can withstand 15G of vibration, and it features a dynamic self-calibration algorithm. It performs effectively in off-road conditions and in extremely hot or cold climates (-40°C to 150°C). When the hybrid car's air conditioning pressure sensor is in standby, its special 8mA ultra-low standby power consumption prevents the battery from draining. It is compatible with over 20 well-known automobiles, such as the Mercedes-Benz EQ series and the Toyota Prius, and it has earned the IATF 16949 certification.
It allows repair shops to perform "one device, multiple inspections" by generating a system health report and testing the reliability of the air conditioning pressure switch in roughly 15 minutes. This results in an 80% reduction in the cost of replacing the incorrect item.
Products Advantage
- Dual-protection Fail-Safe Pressure Control
This sensor is intended to outperform traditional air conditioning pressure switches and has a dual-trigger mechanism:
activates the AC compressor cutoff at 28 bar to avoid system overload.
Secondary 32-bar override to avoid catastrophic failure
Ideal for ensuring compliance with SAE J2746 safety standards and spotting indications of air conditioning pressure switch failure, like refrigerant leaking.
- Protecting Coastal Climates from Corrosion
Our 316L stainless steel housing is resistant to saltwater damage (ASTM B117), unlike ordinary automotive pressure sensors that can withstand 1,000+ hours of salt spray. In coastal and maritime vehicles, this prevents air conditioning pressure switch issues, reducing the need for replacements by 70% over a five-year period.
- Accurate Zero-Drift EV/Hybrid Systems
Using MEMS-based air conditioning pressure sensor technology, it maintains accuracy between -40°C and 150°C within ±1.5%. uses precise HVAC load control to increase battery efficiency by 18% and fixes "AC pressure sensor false reading" issues in electric vehicles.
- R134a/R1234yf Universal Compatibility
supports next-generation refrigerants and seamlessly replaces outdated air conditioning pressure switches in older systems. Its auto-calibration reduces installation time by 55% and helps prevent "AC sensor calibration errors" during retrofits.
- OBD-II Integration for Real-Time Diagnostics
tracks deterioration in the performance of the air conditioning pressure switch by:
- P0530 (Low Circuit) and P0532 (Signal Implausible) live CAN-BUS pressure graph warnings
- permits preventative maintenance prior to compressor breakdowns.
Main application scenarios
Signs that the air conditioning pressure switch is broken
The dual-threshold redundant shutdown design of this sensor ensures that false triggering never occurs in the event that an automobile's A/C pressure switch malfunctions (for instance, if the refrigerant pressure fluctuates and the compressor repeatedly starts and stops).
By employing dynamic pressure waveform analysis, it accurately distinguishes between signal jitter produced by outdated A/C pressure switches and actual system overpressure. This prevents false positives from causing A/C systems to shut off.
Automotive Air Conditioning Pressure Sensor with High Accuracy
When the engine is cold (-30°C) or under a lot of load, this sensor's accuracy stays within ±1.2% of full scale thanks to its MEMS silicon-based pressure sensor. Compared to standard mechanical air conditioning pressure switches, which have an error limit of ±5%, this is significantly superior.
For new energy vehicles that require precise air conditioning pressure sensors, this performance satisfies the IATF 16949:2016 requirement.
How to Check the Reliability of an AC Pressure Sensor
Car owners can utilize the OBD-II interface to perform the following tasks thanks to the integrated ISO 14229 self-test protocol:
To ensure that an analog signal from an AC pressure sensor is linear across the entire 0-35 bar range, force the start of the test.
Write a report outlining how, throughout the previous 72 hours, the AC pressure switch's functioning has gotten worse.
This feature enables repair companies to rapidly assess the condition of sensors, reducing the expense of incorrect replacements by 80%.
R134a to R1234yf Pressure Switch Retrofit
When you upgrade or convert your refrigerant system, you won't need additional signal conversion modules because this air conditioning pressure sensor is compatible with multiple protocols.
Similar to previous GM and Ford vehicles, R134a systems have a default operating pressure range of 0–26 bar.
R1234yf systems: These automatically switch to the high-accuracy mode between 0 and 32 bars for cars made in Europe.
This reduces the installation time to 15 minutes and resolves issues with common air conditioning pressure switches that operate on several platforms.
why choose us
why choose our products
Our own production base focuses on making fundamental parts like car sensors and engine injectors all in one place. Ne can lower prices by 17% or more without any middlemen. They can also support order response and customized mass production within 30 days. They can independently control every step of the process, from precision laser welding to strict quality inspection, to make sure that the quality meets OE standards. This helps global customers make cost-effective purchases without worrying.
Frequently Asked Questions
Q1: How to diagnose HVAC pressure switch failure symptoms with this sensor?
-
A: To keep an eye on live pressure data, connect a CAN-BUS reader. If the readings are inconsistent or show error codes (like P0530), the device is broken.
Q2: Is this compatible with Ford or Toyota vehicles?
+
-
A：Right now, it's best for VW Group platforms. Get in touch with us for unique protocols.
Q3: Auto AC pressure sensor replacement cost savings?
-
A: Our direct pricing saves repair costs by 25% compared to parts from a dealership.
Q4: How to prevent false triggers from engine heat?
-
A: The sensor's dual-layer thermal buffer keeps its accuracy within ±1% at 120°C.
Q5: How to integrate with aftermarket AC kits?
-
A: Give our team the CAN signal standards for adapters that are easy to use.
Hot Tags: air conditioning pressure switch, China air conditioning pressure switch manufacturers, Air Conditioner Pressure Sensor, Pressure Sensor Air Conditioning, Audi Air Conditioning Pressure Sensor, Audi Air Con Pressure Sensor, Air Conditioning Pressure Switch
Send Inquiry
