4 Bar Map Sensor Honda
Products Description
Honda has upgraded its 4 bar map sensor for extreme surroundings and anti-interference. It passed high-strength vibration testing and is composed of aluminum alloy material. You should definitely get it.
Specification
| Type: | Manifold Air Pressure Sensor (MAP Sensor) |
|
| Manufacturer Part Number: | 079800-7590 | |
| OE/OEM Part Number: | 079800-7590 | |
| Manufacturer Warranty | 1 Year | |
| Fitment Type | Direct Replacement | |
| Country/Region of Manufacture | China | |
Installation process
About 4 bar map sensor honda：
One can disassemble obsolete components by:
① Cut the battery's negative terminal.
② Release the plug lock with the specific tool (Honda 07AAA-SNAA100).
Torque demand:
Sensor fixing bolt: 9.8–11.8 N · m; must be tightened in a cross step pattern.
2. Adaptive ECU:
Following replacement, the next has to be done:
① HDS diagnostic tool finds its way on the "MAP Sensor Learn" menu.
② Run the engine at 2000 rpm until the coolant temperature is at least 80 ° C;
③ then, enable dynamic calibration by doing three quick full throttle presses.
FAQ
Q: What does a 4 bar MAP sensor do?
A: It sends the ECU electrical data derived from the pressure signal. The ECU makes the necessary changes using this information to ensure your engine works as it should.
Q: What does a higher bar MAP sensor do?
A: "A 1-bar sensor's capacity is limited to atmospheric pressure measurement. From an absolute vacuum to roughly sea-level, Strader then explains. "Your engine will have more pressure than sea level if it is going to be "boosted". You therefore require a greater capacity sensor, either a 2-bar or a 3-bar.
Q: What are normal MAP sensor readings?
A: First of all, MAP values relate to altitude; therefore, at what altitude are you now? Second, sea level normal readings fall between 8 and 12". Higher altitudes call for 14 to 18". Look for vacuum leaks before ordering a new component.
Q: Is it OK to drive with a faulty MAP sensor?
A: Driving a car with a malfunctioning MAP sensor will cause problems including misfiring, stalling, and exhaust gas recirculation issues since the ECU cannot ascertain the proper air to fuel ratio. If you must drive, steer clear of covering great distances or lengths of time.
Q: Can I clean a MAP sensor?
A: Regular car maintenance calls for cleaning the MAP sensor every 30,000 to 50,000 miles. Can I wipe the MAP sensor with any cleaning agent? No; you should only use cleansers intended for MAP sensors since they are safe and efficient in cleaning dirt without compromising the sensor.
We have a rich sku inventory. If you need any other sku number, please email us to inquire about the product and price.
Hot Tags: 4 bar map sensor honda, China 4 bar map sensor honda manufacturers, 2 bar map sensor ls1, mk7 map sensor, adjustable map sensor, engine map sensor, lt4 map sensor, oem map sensor
Send Inquiry
