Tire Pressure Monitor Sensor Replacement
Specification & Features
OE/OEM Part Number
42753-STK-A04
Manufacturer Part Number
42753-STK-A04
Interchange Part Number
42753STKA04, 42753TL2A52, PMV-107G
Superseded Part Number
42753STKA04, 42753TL2A52, PMV-107G
Sensor Type
Tyre Pressure Monitoring Sensor
Placement on Vehicle
Front, Left, Right, Rear
Manufacturer Warranty
1 Years
Features
Direct Fit, Easy Installation, Wireless
Original production fit
Designed for Replace Tire Pressure Sensor, this product exactly fits the TPMS systems of the 2016-2024 Accord, CR-V, Civic and Acura RDX, strictly follows the Honda HDS system protocol with a built-in Schrader EZ-Sensor® third-generation chipset. No manual programming is needed after installation; the vehicle can automatically complete the ID matching (99.6% success rate) at a speed of 32km/h for 8 minutes, so totally removing the dashboard error problem after tire pressure monitor sensor replacement. Verified by Honda Techstream diagnostic system, compatibility is like to original components (P/N 42753-STK-A04).
including a dynamic sleep chipset
The industry average is 1.1 A, however the quiescent current is just 0.4 A. The signal transmission interval is intelligently adjusted to be prolonged to 10 minutes when stationary and lowered to 3 minutes when driving.
The Honda original parts only last eight years, however the CR2450 battery lasts twelve.
The average yearly maintenance cost is lowered by $42/vehicle in the Honda TPMS sensor replacement cost initiative of Florida's online auto fleet, according to verification by a third-party laboratory.
Monitoring all climates with great precision
- Low temperature adjustment: Starting at -40°C, pulse heating avoids freezing the piezoelectric element.
- High temperature corrections: Under 150°C, automatically adjust data using NTC thermistor
- Nano-coated circuit boards resist humidity influence rate ≤0.3%
- Measured information: Tyre pressure monitoring inaccuracy is constant at ±0.8 PSI in Arizona 58°C asphalt road and Quebec -38°C ice and snow climate.
Products Description
Durability
passed triple demanding military standard MIL-STD-810G:
- Shock resistance: 50 drops from 1.5 meters straight to the concrete floor without harm
- Two hours of continuous vibration at thirty-G acceleration (frequency range 10-2000Hz)
- Resistance to corrosion: 1,200 hours of neutral salt spray tests three times greater than SAE J2334 norm.
With a service life of 10 years/150,000 miles, 67% longer than standard sensors, especially fit for Alaska's frigid and snowy roads or Dubai's hot temperature road conditions.
90-second minimalistic installation using do-it-yourself user-friendly design
Three main developments comprise the proprietary SnapLockTM valve system:
1.Pre-applied sealant: O-rings coated with PTFE-coating provide zero-leakage installation.
2. Torque visualization: The valve base ring turns from red to green when the set 5.2 Nm is attained.
3.Suitable for 19mm universal wrenches, anti-slip patterns help to lower wheel damage risk.
Novice users only take three minutes and fifteen seconds on average to finish the Replace Tyre Pressure Sensor.
Typical use cases
why choose us
why choose our products
Our own production base focuses on one-stop production of fundamental components which includes cars sensors and engine iniectors. With 0 middleman costs, Ne can achieve a price reduction of 17%+; support order response and customized mass production within 30lays; independently control every link from precision laser weldingechnology to strict quality inspection to ensure that the quality corresponds with OE standards, so helping global customers to reduce economical purchase without worries.
Frequently Asked Questions
Lorem ipsum dolor sit amet,consectetur.
Q: Without dealership tools, how should one change the tyre pressure sensor on Honda CR-V?
+
-
A: Starting the car, drive for five minutes at forty km/h; the system immediately goes into learning mode and the TPMS light on the dashboard flashes three times, signifying successful pairing.
Q: Is it compatible for Honda's HDS diagnostics system?
+
-
A: Completely compatible; in 99% of circumstances the sensor automatically completes ID registration and no manual intervention is needed.
Q: In a humid surroundings, how dependable is the sensor?
+
-
A: Passed the Florida rainy season field test, the IP68 protection level can survive immersion in 1.5 meters of water for 72 hours.
Q: Does one have to re-balance following installation?
+
-
A: Designed symmetrically on the inside of the wheel hub, the sensor weights only 9.8g-less than the original 11.5g. 98% of the cases call for no extra weight.
Q: When ought one to repair the tyre pressure sensor?
+
-
A: Use our free OBD-II detection tool for diagnostics when tyre pressure data is constantly lost or the instrument signals "TPMS System Failure".
Hot Tags: tire pressure monitor sensor replacement, China tire pressure monitor sensor replacement manufacturers, Audi Air Conditioning Pressure Sensor, Bmw Tire Pressure Sensor, Honda Tire Pressure Sensor, Replace Tire Pressure Sensor, Subaru Tire Pressure Sensor, Toyota Tire Pressure Sensor
Send Inquiry
